Small Victories

Well, even though I haven't had much time to update or do any work on the ships this week, I have made some progress;

Completely cleaned and organized my gaming room. Thank God for the USPS free Priority Mail boxes, as they make great storage-savers.

Hit the 100 mark on my Dreadnaughts. I'm starting to see a little degredation, but I should make it to 200 without having to remold.

Sold a bunch of stuff, so I placed another nice order with Drew. Minus the Euphemisms, I ordered:

5x Dreadnaughts
2x Interdictors
3x Vindicators (Cruiser the Interdictor is based off)

And finally, I managed to trim, assemble, drill, and base all 7 of my Kuat Command Cruisers (SWMB Rebel Cruisers).

Weekday Drudgery

And so much for my successful molding run! I only had time to do 8 Dreadnaughts today...


Tomorrow I hope to pour the first half of a new Imperial Frigate design based on a chopped-up Jedi Starfighter.

Also I received three Starter Sets today that I acquired very cheaply, so I now have 3 Super Star Destroyers! Just need to find a way to trade off 2 of the Viscounts...

SWMB Rebel Cruiser

A few folks have asked about the modified Rebel Cruiser I have in my Dreadnaught photos;

I'm using it as a larger Fleet Command Cruiser, but I cut the center section out, as on most of the minis they are badly warped. Many of the SWMB ships suffered from being pulled from the molds while still setting, leading to a certain degree of warpage on many of the miniatures.

I think it makes a nice little Cruiser and adds some variance to the fleet.

Dreadnaught Count 2.0

70 Resin
2 Metal

Here's some photos;




Titanium Venator, Modified SWMB Rebel Cruiser and Resin Dreadnaught



Venator, Resin Dreadnaught and Metal Dreadnaught (mine are a little shorter and fatter)



38 Dreads awaiting flash-cleaning.



Suspicious Dog is watching you mold...

Dreadnaught Count

Up to 42 resin and 2 metal!

If I can hit 100 by next weekend, I'll be happy, though next week will be quite busy.

Photos of the Dreadnaughts and a few new conversions will be up tomorrow night.

Woohoo Again!

The mold worked quite nicely and two successful pulls later I have birthed 4 small Dreadnaughts!

They are about 1-2mm shorter than the Bergstrom one, so I'll still buy some of Drew's to flesh out the resin masses.

Photos will follow.

Dreadnaught-class Concept photos

Plans are for at least 200-300 of these guys...I'd like a decent representation of Republic vessels, a few Sector Defense Fleet vessels, and part or all of the Katana Fleet. That'll be alot of resin!

Another Mold Update

Well, I finished my scratchbuilt Dreadnaught-class Heavy Cruiser. I used a Studio Bergstrom one for my dimensions and came up with something that compares nicely. Though there's not as much detail as the metal one, it'll be better than buying 50-100 of the buggers. First part of the mold was poured this morning, so first pull should be tomorrow.


Katana Fleet here I come!

Random Murmurings

While Grouse hunting this afternoon my mind began to wonder...and this is what bubbled up;


Possibility 1


-Terrible Air-speeder crash causes loss of Palpatine's supporters

-Assassination attempts on Antilles' supporters fails

-Antilles elected Chancellor, Bail Organa becomes Senator

-Worried by his inability to foresee this outcome, Sidious is shaken enough for Maul to try and eliminate him

-Sidious/Palpatine fades from public view to allow for direct command of seperatist effort


Outcomes;


Seperatists recieve more support from Outer Rim systems

Jedi unaware of Sith resurgence

Republic Navy begins slow expansion in face of increasing lawlessness

Ship/Weapons research sped up, leading to earlier deployment of various vessels and equipment

Clone Wars start on Geonosis, Republic is better prepared for open war

Clone Wars last longer



Possibility 2


-Existence of Strong Naval tradition leads to less Clone crews in early days of the war

-When Military Expansion Act passes, volunteers are directed towards the navy rather than army

-Chancellor creates "Expeditionary Fleets" for Jedi use, uses mostly clones

-Republic Navy fleets are more experienced, but most new equipment goes to Clone Armies creating animosity towards government

-Passage of Republic Security Act alarms many high-ranking officers, cementing the growing unease in non-clone forces

-Order 66 and war outside of Core progresses as normal, however volunteer forces revolt against Emperor


Outcomes;
Republic fleet is numerically outnumbered initially, but has more experience

With the Military Expansion Act, more equipment becomes available to the volunteer Navy, however Clones recieve newer vessels

Volunteer Navy becomes resentful of their treatment and the treatment of Clones, many officers grow to oppose the "new" government

Upon issuance of Order 66, Volunteer Navy rebels against Republic/Empire, because of close contact with "free" military, more clones suffer madness from programming errors

Roughly 5% of clones openly rebel, especially in Spacefighter Corps, and side with Volunteer Navy

Formation of Alliance to restore the Republic, Galaxy is divided in thirds;

1/3 Loyal to Empire
1/3 Loyal to Alliance
1/3 Neutral, in hopes of avoiding the Civil War (mostly Outer Rim worlds)

Palpatines forced to sieze most of now de-activated Seperatist equipment to augment Imperial Forces

Alliance also siezes much Seperatist equipment, leading to oddly mixed fleets
Major Alliance worlds; Chandrila, Corellia, Alderaan, Rendili, Sluis Van, Sullust, Dac, Thyferra, Bothawui, Caamas



I prefer possibility 2. Next post shall have large photo update of current fleet and fighters. Also, I'll be outlining a 1/72 Hoth "Realism" project.

Conversions

Corellian "Star Destroyer" Conversion



A mix of Nova-Star parts, Otterware vessels, and my own. The gunship is from Odyssey Slipways.



Main-line Corellian Cruisers



All the stuff I cleaned and assembled this evening. I'll be working on a new mold tomorrow and a few more casts.

Casting Update

Well, they'll do for now, but I believe I need to go with a different type of silicon next time. I've been using OOmoo 30 for it's ease of use and cheap overall cost, but I think I'll switch to the MoldMaster line in the future.

Also, my 7 Trade Federation Battleships are en route and should be here by Monday. I intend to use those as the basis for my aggressor force, and a few other Lucrehulk vessels may get repainted for Imperial or Alliance use in the future. They may have been nice targets by the time of the Galactic Civil War, but they would make great Carriers, and did in some cases.

Obligatory Pet Post (Dieter)

8 weeks old


11 weeks old


22 weeks old

Primary drain on my free time= 5.5 month-old German Wirehaired Pointer

He's already at 52 pounds, and considering the parents were 65 lbs and 75 lbs each, he's gonna be big. He's at least 5 lbs bigger than any of his litter-mates.

Foray-class Gunship

I'm working on a Plasticard master of something like these so I can get a mold started before the end of this month. I plan on updating the engine pods to something similar to the current CEC offerings.

Hooray!

Well, the first parts-mold is done! This one consists of 2 "Forward Hull" sections, 1 from the Republic Cruiser and 1 from a Corellian Corvette. Test casting will begin tonight, and hopefully the next mold (of the engine sections) will be done tomorrow.

Concept photos (2) AA-9 Freighter/Transport

Concept photos (1) Corellian Star Shuttle/Combat Shuttle

Ships for the "Judicial Navy"

So, here's the background I've chosen to justify me fleet;

For those of you who know a little about Star Wars canon, the Ruusan Reformation effectively dissolved any organized military forces the Republic posessed in 1,0000 BBY. After the legislative power was for all intents and purposes removed from the Supreme Chancellor and restored to the Senate, the Jedi Order renounced their military ranks and disbanded their troops, placing themselves under the Judicial Departments' jurisdiction.

I will be ignoring the Reformation, as I feel that the concept of a Pan-Galactic government disbanding any organized combat forces it possesses as completely ludicrous, if not idiotic.

That said, I do believe the military would have been down-sized with the newfound peace, but would still be a viable combat entity. I foresee a large number of "Core-centric" designs, especially Corellian and Sienar Systems vessels making up the vast majority of the Republic naval forces.


Here's a breakdown of the ships I intend to use or model;

Capital-class Vessels
Chancellor-class Cruiser (SWMB Republic Cruiser)
Ambassador-class Cruiser (Micromachines Corellian Corvette)
Sentinel-class Light Cruiser (bash of Odyssey Slipways Corvette & SWMB Republic Cruiser)
Senate-class Light Cruiser (Modified SWMB Republic Cruiser)
Various Corellian Vessels, to be produced from bits and detailed later


Escort-class Vessels
CR-70 Corvettes (Odsy Slpwy 1/10,000 Corvette)
D-75 Gunships (Odsy Slpwy 1/10,000 Gunship)
Foray-class Gunships (Scratchbuilt)
Pelta-class Frigate (Scratchbuilt)
Corellian Combat/Star Shuttle (Scratchbuilt)
Command Frigate (Modified SWMB Republic Cruiser)


Starfighters
ARC-170's
Eta-2 Actis'
V-19 Torrents

Photos of New Stuff

Here's a few comparison shots of my recent purchases;



(L-R) SWMB Republic Cruiser, Otterware Starfire Scout, Odyssey Slipways Radiant VII, Odyssey Slipways Corellian Corvette, Otterware TFN Light Cruiser



(L-R) SWMB Republic Cruiser, Otterware Vagyr Battlecruiser, SWMB Action VI & Modified Action IV, MicroMachines Star Destroyer




Loads of Consulars! (51 to be precise)

Star Wars Miniature Battles

I know, I know; the words "Collectible Miniatures Game" makes most of us cringe in disgust, but some of them are really cool!!!

I've always loved the Republic's Consular-class vessels, especially the design and paintjob. So, I've decided to use these as my primary Cruiser-type in the Corellian fleet I'm building.

Now, I never said that my fleet would be accurate or canon in composition, simply cool and fitting for Star Wars.

I'll post some photos of my recent acquisitions soon.

First Post

Well, Corellian Musings...sounds very "new-age", doesn't it? Basically this will chronicle my adventures in shipbuilding for the Pre-Clone Wars and Clone Wars eras. The purchases and scratchbuilds shall reflect a distinct Corellian style, hence the name. I have a number of ongoing projects, but this will be my primary focus for the winter.

Enjoy!